How Much Paint Do I Need for a Room?
Buying the right amount of paint saves money and avoids mismatched batches. You only need a tape measure and four numbers: the wall area, the openings, the number of coats and the coverage printed on the can.
The paint formula
Paint needed = (wall area − openings) × coats ÷ coverage per gallon (or liter)
Coverage is printed on the can. Typical interior paint covers about 350–400 sq ft per US gallon, or roughly 10–12 m² per liter, on smooth, primed walls. Rough or porous surfaces can cut that considerably.
Step 1: Measure the walls
Measure the length of each wall and the ceiling height. For a rectangular room, the quickest method is:
Wall area = perimeter × height = 2 × (length + width) × height
Step 2: Subtract doors and windows
Measure each opening, or use typical sizes: a standard interior door is about 20 sq ft (1.9 m²), and an average window about 15 sq ft (1.4 m²). Small openings are often ignored, which builds in a little extra paint for touch-ups.
Step 3: Allow for coats and coverage
- Two coats is the norm for an even finish, especially when changing colour.
- One coat may be enough when refreshing the same colour with a good-quality paint.
- Primer is a separate coat: use it on new drywall or plaster, stains, or when going from dark to light.
Worked example: 12 × 14 ft bedroom, 8 ft walls
- Perimeter: 2 × (12 + 14) = 52 ft.
- Wall area: 52 × 8 = 416 sq ft.
- Openings: 1 door (20) + 2 windows (2 × 15) = 50 sq ft.
- Paintable area: 416 − 50 = 366 sq ft.
- Two coats: 366 × 2 = 732 sq ft.
- Paint: 732 ÷ 350 = about 2.1 gallons.
That's just over 2 gallons, so buy 2 gallons plus a quart, or 3 gallons if you want spare for touch-ups. The ceiling (12 × 14 = 168 sq ft) needs about another half gallon per coat.
Worked example: 4 × 5 m room, 2.5 m walls
- Perimeter: 2 × (4 + 5) = 18 m.
- Wall area: 18 × 2.5 = 45 m².
- Openings: door 1.9 m² + window 1.5 m² = 3.4 m².
- Paintable area: 41.6 m². Two coats: 83.2 m².
- Paint: 83.2 ÷ 10 = about 8.3 liters, so a 10-liter tin, or a 5 L plus a 2.5 L tin with a little spare capacity.
Quick estimate table (walls only, two coats, 8 ft ceilings)
| Room size | Paintable wall area* | Paint for two coats |
|---|---|---|
| 10 × 10 ft (small bedroom, bathroom) | ≈ 270 sq ft | ≈ 1.5 gallons |
| 12 × 12 ft | ≈ 334 sq ft | ≈ 2 gallons |
| 12 × 14 ft (average bedroom) | ≈ 366 sq ft | ≈ 2–2.5 gallons |
| 14 × 16 ft | ≈ 430 sq ft | ≈ 2.5 gallons |
| 16 × 20 ft (living room) | ≈ 526 sq ft | ≈ 3 gallons |
Tips that change the amount
- Textured or porous walls (stucco, brick, bare plaster) can use 20–50% more paint.
- Big colour changes, especially dark to light, may need primer plus two coats.
- Rollers vs sprayers: sprayers waste more through overspray.
- Buy from one batch, or mix all cans together (“boxing”), so the colour matches.
- Trim and doors are usually a different finish; a quart covers the trim in an average room.
Frequently asked questions
How much paint do I need for a 12x12 room?
About 2 gallons for two coats on the walls with 8 ft ceilings, after allowing for a door and two windows.
How many square feet does a gallon of paint cover?
Usually 350–400 sq ft per coat on smooth, primed walls. Check the can, as rough surfaces cover less.
Do I need two coats of paint?
Usually yes for an even finish, especially when changing colour. One coat can work when refreshing the same colour.
How many liters of paint for a room?
A 4 × 5 m room with 2.5 m walls needs about 8–9 liters for two coats, at 10 m² per liter.
Should I subtract windows and doors?
Yes for large openings. A door is about 20 sq ft and a window about 15 sq ft.